Customer Support Admin

The Koda Folding LED Work Light with 120V Outlets and USB Charging is light and handy for any workspace, but does require to be plugged in. It is not battery powered.

There are 2 USB ports (5V, 3.1 A total) and 2 grounded AC power outlets.

The Koda Folding LED Work Light with 120V Outlets and USB Charging is rated for indoor use and dry locations only. Any use outside or in wet locations may cause the unit to malfunction and/or risk ...

Check that the plug is connected to the main socket and that that master switch on the Koda Folding LED Work Light with 120V Outlets and USB Charging is set to on, either in a “High” or “Low” setting.

Check that the plug is connected to the main socket and that that master switch on the Koda Folding LED Work Light with 120V Outlets and USB Charging is set to on, either in a “High” or “Low” setting.

If the Koda Folding LED Work Light with 120V Outlets and USB Charging turns off automatically, the sockets may be overloaded. Unplug the unit and turn off the main switch, then unplug all products ...

To install your new Koda 46” LED Indoor and Outdoor Shop Light with Motion Sensor, please see this helpful installation video. You can also refer to the instruction manual found here.

Depending on the setting selection on the shop light, the Koda 46” LED Indoor and Outdoor Shop Light with Motion Sensor can sense motion up to 39 ft away. Please refer page 9 in the following instr...

There could be a few reasons why the Koda 46” LED Indoor and Outdoor Shop Light with Motion Sensor will not turn on: Power to the wall plug is off Ensure the wall outlet you’re plugging the shop ...

There are a number of settings that can be changed on the Koda 46” LED Indoor and Outdoor Shop Light with Motion Sensor, including: Motion sensor – adjust the distance of motion sensing coverage t...