Winnieip

KODA recommends installing the fixture roughly 6 - 7 ft (1.8 - 2.1 m) above the ground.

Yes. The KODA Halo is designed to replace a standard hardwired outdoor wall fixture at a front door, porch, patio or garage. Always turn off power at the circuit breaker before removing your existi...

A #2 Phillips-head screwdriver and silicone sealant, neither of which is included. After the fixture is mounted, apply silicone sealant along the canopy to fill the gap between it and the mounting ...

2 x Outdoor LED Wall LanternFilament 7-Watt LED BulbsInstallation Kit: mounting bracket, 2 x bracket mounting screws, 3 x wire nuts and 1 x sensor cap per lantern

Yes. The fixture is ETL listed and complies with Part 15 of the FCC rules.

Turn off power to the fixture and allow the bulb to cool. Wipe the frame and glass with a soft, damp cloth. Do not use abrasive cleaners or solvents, and do not spray the fixture with a pressure wa...

This product carries a 5-year warranty against defects in workmanship and materials, subject to the conditions and additional warranty information available at www.kodalights.com/warranty.

There could be a couple reasons why the KODA Halo may not function correctly:The wall switch controlling the light is turned off - Check to see that the controlling wall switch is turned on.The wal...

This usually means the sensor is not reading daylight correctly:The sensor cap is still on - Remove the sensor cap from the top of the canopy to enable the automatic Dusk-to-Dawn feature.The sensor...

There could be a couple reasons why the light flickers or cycles on and off:Light is reflecting back onto the sensor - Light from the fixture reflecting off a nearby wall, window or other surface c...