Winnieip

There could be a couple reasons why the KODA Thomas may not function correctly:The wall switch controlling the light is turned off - Check to see that the controlling wall switch is turned on.The f...

There could be a couple reasons why a bulb does not light:The bulb is not fully seated - Turn off power at the wall switch, let the bulb cool, remove the glass shade and make sure the bulb is screw...

There could be a couple reasons why the light stays on during the day:The sensor is shaded or blocked - If the fixture is mounted under a deep overhang, porch roof or behind landscaping, the sensor...

There could be a couple reasons why the light flickers or cycles on and off:Light is reflecting back onto the sensor - Light from the fixture reflecting off a nearby wall, window or other surface, ...

The Dusk-to-Dawn sensor responds to the amount of natural light, not the time of day. On cloudy or stormy days the light may turn on earlier, and during the longer days of summer it will turn on la...

With the wall switch turned on, fully cover the sensor with your hand or an opaque object to block all light. After a few moments the light should turn on. When you uncover the sensor, the light wi...

Email info@kodalights.com or call (866) 294-9244 or visit www.kodalights.com.

If you are not experienced with electrical work, it is recommended. However, this product is made for DIYers and can be safely installed by turning off the circuit breaker and following the user ma...

Yes, you should be able to use the existing junction box.

After installing your Koda Motion Activated LED Floodlight, you will need to set and aim the motion detector, which can cover up to 80 ft.To set the proper angle, please see the instruction manual ...