Winnieip

If you are not experienced with electrical work, it is recommended. However, this product is made for DIYers and can be safely installed by turning off the circuit breaker and following the user ma...

Yes, you should be able to use the existing junction box.

After installing your Koda Motion Activated LED Floodlight, you will need to set and aim the motion detector, which can cover up to 80 ft.To set the proper angle, please see the instruction manual ...

To enable the Manual Override Function on the Koda Motion Activated LED Floodlight:When the power is on the light warms up for 20 seconds, then enters PRESET MODE. In this mode, the light operates ...

You can view the Koda Motion Activated LED Floodlight Manual on the product’s web page. You can also download the manual for future reference by clicking on the attachment below.

There could be a couple reasons why the Koda Motion Activated LED Floodlight may not function correctly:The wall switch controlling the light is turned off.Check to see that the controlling wall sw...

There could be a couple reasons why the Koda Motion Activated LED Floodlight may not function correctly:The detector may be installed in a relatively dark location.Even though there may be daylight...

There could be a couple reasons why the Koda Motion Activated LED Floodlight may not function correctly:A lamp is positioned too close to the detector or pointed at nearby objects that cause heat t...