Winnieip

The LED bulbs are rated for 15,000 hours each. LED life will depend on operating temperature, environmental conditions, etc.

The bulbs can be replaced. The KODA Halo uses a standard replaceable bulb, so when a bulb reaches the end of its life you can simply replace that bulb instead of the entire fixture.

The fixture is compatible with an A19 filament LED bulb rated 120V, 60 watts maximum, with an E26 medium base. The included LED bulb is not for use with a dimmer.

Turn off power to the fixture at the wall switch or circuit breaker and allow the bulb to cool. The open-bottom design lets you reach the socket from below. Screw the new bulb in by hand.

This light fixture is designed for use in a 120VAC, 60Hz fuse circuit.

No. This fixture is not for use on a dimming circuit, and the included LED bulb is not dimmable. Please connect it to a standard on/off wall switch.

Yes. The fixture works with a standard on/off wall switch. To use the Dusk-to-Dawn feature, leave the wall switch in the ON position and the light will turn on and off automatically.

Yes. Each lantern has a built-in photo sensor that automatically turns the light on at night and off during the day. To use this automatic feature, remove the sensor cap from the top of the canopy.

The built-in Dusk-to-Dawn feature uses photo sensing technology that enables the KODA Halo to automatically turn the light on and off as darkness and daylight are sensed.So long as you keep your li...

Yes. Put the included sensor cap back on the sensor. The cap blocks light to the sensor, and the lantern is then controlled by your wall switch like a standard light.