The light stays on continuously, what do I do?

There could be a couple reasons why the Koda Motion Activated LED Floodlight may not function correctly:

• A lamp is positioned too close to the detector or pointed at nearby objects that cause heat to trigger the light detector.
  • Try repositioning the lamp away from the detector or nearby objects.
    
    
• The light is set to Manual Override Mode
  • Refer to the instruction manual to turn off Manual Override Mode.
    
    
• The light is on the same circuit as a motor, transformer, or fluorescent bulb.
  • Install the light fixture on a circuit without motors, transformers or fluorescent bulbs (i.e. a dedicated circuit).
    
    
• Some of your wires are not properly color coded.
  • Check for proper wiring and contact a professional electrician if needed.